Fitting a Gotek to my TC01

[Lardo Boffin]

Hello all

I should be getting my TC01 back shortly from being repaired and would like to fit a gotek to it.

Currently I have two disc drives fitted inside Albert.

I have an external gotek that I use with my BBC micros - it has a beeb floppy cable attached and I can use a beeb for power in the short term. Can I use this or do I need to get another?

My gotek:

AC827F66-50FA-4964-9906-6E1C34860335.jpeg (2.54 MiB) Viewed 10720 times

[Lardo Boffin]

It looks like I may need one of these to hook up the power internally?

CE4421E8-3115-4156-8998-F06A5F046922.jpeg (491.85 KiB) Viewed 10717 times

Do I need to swap the 5 and 12V cables around at the gotek end? I see that someone selling kits (https://www.simulant.uk/shop/Tatung-Ein ... earch=Tc01) suggests this is required?

A look at my hardware manual also suggests this is the case:

5352154B-6FCF-486E-A0B8-60A9F04A4A58.jpeg (946.42 KiB) Viewed 10717 times

[vanpeebles]

I think the main thing to watch for is the voltages. On the 256, I need to swap two colours round, so the 12 doesn't go the 5.

[Lardo Boffin]

Typically the molex adaptor is nowhere near long enough. That comes from ordering blind I guess.

I tried plugging the gotek into the external drive port but just get no sector 0 or similar. I will clean the pins properly and give it another try.

I unplugged the main drive connector near the back and plugged the gotek floppy cable into it and it worked a treat! My Beeb is currently supplying the power as it has a long cable.

Just need a more permanent solution.

[Lardo Boffin]

Cleaned the pins on the external drive connector and all good!

I now have my beeb gotek connected to the external drive connector, I stole a PSU from my Amstrad CPC 6128 external gotek and connected it all up. I disconnected the power to the original internal drive 0

My gotek is now drive 0, my internal drive 1 is still drive 1. The internal drive 0 is doing nothing at the moment.

332F998D-3FA0-4993-8442-9C7A1883D3C9.jpeg (2.71 MiB) Viewed 10660 times

[Lardo Boffin]

Would be rude not to...

EA192927-D439-4D74-B795-11FA661C3DC3.jpeg (2.73 MiB) Viewed 10660 times

[Lardo Boffin]

And a really good version of Manic Miner!

5F4C19B9-7D5B-419F-A96B-CCCCE68D4DE6.jpeg (2.84 MiB) Viewed 10659 times

[Will]

Good thread this - it gave me enough of a push to connect a micro-gotek/ff to my Einstein, which is so much easier than trying to find floppies.

[Lardo Boffin]

Good thread this - it gave me enough of a push to connect a micro-gotek/ff to my Einstein, which is so much easier than trying to find floppies.

Hi Will

Glad to hear it! Next stage is an internal gotek so I can reclaim my external one and tidy the desk a little. I’m struggling to find anyone doing an adaptor however so it may take a while.

[Will]

Good thread this - it gave me enough of a push to connect a micro-gotek/ff to my Einstein, which is so much easier than trying to find floppies.

Hi Will

Glad to hear it! Next stage is an internal gotek so I can reclaim my external one and tidy the desk a little. I’m struggling to find anyone doing an adaptor however so it may take a while.

A friend of mine printed me the bracket in this post : https://www.tatung-forum.co.uk/viewtopic.php?f=3&t=60 and having offered it up it appears to fit quite well. The bracket does need a bit of filling/painting (it's white) before final fit, and it will need to creative thinking as the frame holes are just out of alignment, but I confident I can bodgeit, erm I mean make it fit properly