The Floppy Drive Thread
-
- Posts: 302
- Joined: Thu Oct 24, 2019 11:47 am
Re: The Floppy Drive Thread
Ah. Good question. It doesn’t work at all on mine. ‘A’ doesn’t work!
TC-01 + einSDein + TM-01 + TK-02 + gotek
-
- Posts: 266
- Joined: Wed Oct 23, 2019 8:43 pm
Re: The Floppy Drive Thread
https://www.ebay.co.uk/itm/Card-Edge-to ... SwKrRdbCnl
I've ordered one of these. Would I be able to connect a spare 6128 or speccy +3 drive instead and test with that?
I've ordered one of these. Would I be able to connect a spare 6128 or speccy +3 drive instead and test with that?
-
- Posts: 266
- Joined: Wed Oct 23, 2019 8:43 pm
Re: The Floppy Drive Thread
https://www.ebay.co.uk/itm/Gotek-adapte ... SwTphdwKq4
How about one of those? Would that be a better choice for the empty external tatung drive cases I have?
How about one of those? Would that be a better choice for the empty external tatung drive cases I have?
Re: The Floppy Drive Thread
I can't say for sure but I think the osbourne adapter won't work. The first one should. Unlike the osbourne adapter all pins are connected straight through.
-
- Posts: 266
- Joined: Wed Oct 23, 2019 8:43 pm
Re: The Floppy Drive Thread
Fingers crossed. It's a shame because the osbourne one is way cheaper
Re: The Floppy Drive Thread
Beware the Osborne one has power lines side by side with data lines, use this and your drive will bang (at least if you plug the power connector ). Well, I guess the designer will have taken this into account and cut some tracks...
-
- Posts: 266
- Joined: Wed Oct 23, 2019 8:43 pm
Re: The Floppy Drive Thread
Sir morris scared me off the osbourne adapter
-
- Posts: 266
- Joined: Wed Oct 23, 2019 8:43 pm
Re: The Floppy Drive Thread
Gah another day of battling and still no working Tatungs. The 256 video cable arrived, and the machine works great. The floppy drive won't touch anything. I took it apart belt looks fine and moves ok, so does the head. However the bottom PCB was loose, and one cable didn't look quite in properly. I'll find some small screws at work tomorrow for the PCB and try again. The 256 is a socketed cable rather than an edge like the TC, but it's one of those shorter than 34pin ones, so I won't be able to directly plug in my hxc drive.
The drive itself is an EME-150C which is apparently not compatible with other drives from the amstrad etc? The drive in my 6128 was some amstrad type thing, I've lost the drive from my speccy +3 and I only removed the sodding thing on the weekend too!
These machines are battling me none stop
The drive itself is an EME-150C which is apparently not compatible with other drives from the amstrad etc? The drive in my 6128 was some amstrad type thing, I've lost the drive from my speccy +3 and I only removed the sodding thing on the weekend too!
These machines are battling me none stop
-
- Posts: 266
- Joined: Wed Oct 23, 2019 8:43 pm
Re: The Floppy Drive Thread
Just found it! 6128 has an eme-156 and the plus 3 had the eme-156 v which is a cheapy version
-
- Posts: 302
- Joined: Thu Oct 24, 2019 11:47 am