Tatung Computer Forum

Thanks for the welcome. I think I've finally found the errant '74 that was buggering up the ADC interrupt. Will try a game or two after a fresh brew.

The ADC had had a reprieve. Turned out to be I051a - the 74LS74 that latches the ADC Mask bit. I was watching Q when nRESET toggled the nPR pin and Q would set then immediately clear. A logic tester verified my findings. I found a similar vintage Nat Semi part and everything is now working properly ...

As far as I could see, the TC-01 was shipped for YUV output and the monitor should have worked straight away using the original monitor cable. When I configure for RGB by flipping the links, the monitor works as expected. I will break out the scope and have another look at the monitor at the weekend.

Hi, I'm new to The Einstein having recently picked one up with Sn 6000482. It was a non-runner but replacing a RAM chip, ADC and the 100uF 400V capacitor in the power supply and it seems to have got it going. I went through all the other caps and they were fine. Mike can add my serial number to the ...

Has anyone got any experience with the TM-01's colour decoder card? The monitor works fine in RGB but when I run the TC-01 with YUV, all I get is a single colour. I've had all the CMOS logic off the board and it checks out fine and the caps seem fine. I did replace a few main board capacitors and ...

I picked up an old TC-01 recently and It was working well after replacing I016 and a few capacitors in the PSU. I powered it up the next day and I was greeted with the **EINSTEIN** banner and nothing more. Anyone had an experience with a continuously asserter IRQ line? I've been following the IRQ ...